Chameleon finishing systems are industry leading multi-function folding and gluing systems that are made up of a series of modules followed by a delivery and equipped with a package of top drives and other manipulating accessories. This modular approach allows for maximum flexibility and a wide variety of output possibilities under multiple operating conditions.

Unique to the folder/gluer market and a Chameleon Finishing Systems exclusive, the Chameleon MSR1 is a side register capable module that allows registering of product to extremely tight tolerances for scoring, perforating, or any other situation where perfect placement is required. The MSR1 can be used in conjunction with accessory packages and additional modules - such as our popular S2 module - as a part of a fully equipped Chameleon system or can be used in front of many other legacy and straight-line systems to provide a level of registration not possible otherwise. And when extremely tight tolerance side registering is not required, the unique design of the MSR1 allows for the bed to be straightened, creating a one meter long transport / manipulation / affixing section. The MSR1 is equipped with a top load continuous vacuum assisted feeder, a 1 meter length side register capable transport/manipulation/affixing section with bridge and beam accessory mounting assembly, and available standard in 2 working widths – 650mm and 800mm.

 

Standard Equipment

• Integrated Side Register System
• Top Load Continuous Vacuum Assisted Feeder
• Vacuum Transport Cassette & Pump Assembly
• Bearing Bed Transport System
• Bridge & Beam Accessory Mounting Assembly
• Easily Convertible to 1 Meter Manipulation/Affixing Section
• Electrically Prepared for Stand Alone Operation
• A/C Inverter Drive System

 

Additional Details

Material Specification	Minimum	Maximum
Paper Board	0.15mm (.006in)	0.6mm (.024in)
Corrugated Flute	E & F & N Flutes (With Proper Preparation)

Capability	Minimum	Maximum
Speed	18.3m/min (60ft/min)	200m/min (650ft/min)
Jogging Mode	Standard Equipped
Blank Size:
- 800mm width	76 x 102mm (3 x 4in)	780 x 760mm (30 x 30in)
- 650mm width	76 x 102mm (3 x 4in)	635 x 760mm (25 x 30in)

Installation Requirements
Electrical	220v/3 phase/60hz (Other voltages available)
Compressed Air	90 psi clean and dry
Air Compressor Capacity	Up to 10 cfm